[Recalled] RibLoc U Plus 90 Instrument PRIMARY GUIDE ASSY, LOW PROFILE REF RBL2320 The RBL2320, Low Profile Primary Guide is an instrument used with a power system to compress the RibLoc plates onto the bone, determine the length of the

A safety authority has issued a recall or warning for this item. The confirmed facts from the source notice are laid out below.

Recall details

Why it was recalled

According to the FDA_DEVICE notice, the identified hazard is: Due to potential breakage during use.

This Class II recall concerns device products distributed in United States and was recorded by FDA_DEVICE. Recalls in this category are published so that owners, retailers, and importers can identify affected units and act quickly.

What to do if you own this product

Check whether your unit is affected and follow the authority's guidance before further use.

Read the full official notice →

Related recalls from Acumed LLC

• OPT Croutons is a synthetic bone substitute designed for the repair of bony defects and is made of pure beta-tricalcium phosphate. The tricalcium phosphate is a soluble calcium phosphate salt. — Class II
• The Acumed Slide-Loc Anatomic Radial Head System is intended for use by surgeons with orthopedic training. The device is to be implanted by the surgeon in a sterile operating room setting. Implants are provided in sterile packages. The Acumed Anatomic Radial Head Slide-Loc System consists of mo — Class II
• Acutrak 2 Part Number/Part Description: 30-0021 25.0mm Acutrak 2¿ - 5.5 Screw 30-0021-S 25.0mm Acutrak 2¿ - 5.5 Screw 30-0023 30.0mm Acutrak 2¿ - 5.5 Screw 30-0023-S 30.0mm Acutrak 2¿ - 5.5 Screw 30-0025 35.0mm Acutrak 2¿ - 5.5 Screw 30-0025-S 35.0mm Acutrak 2¿ - 5.5 Screw 30-0027 40.0mm Acu — Class II
• Dual-Trak Clavicle Screws Part Number/Part Description: 40-0136 3.0mm x 80mm Dual-Trak Clavicle Screw 40-0136-S 3.0mm x 80mm Dual-Trak Clavicle Screw 40-0137 3.0mm x 90mm Dual-Trak Clavicle Screw 40-0137-S 3.0mm x 90mm Dual-Trak Clavicle Screw 40-0138 3.0mm x 100mm Dual-Trak Clavicle Screw 40 — Class II
• The Osteo-Clage System consists of stainless steel cable/sleeves and compression plates. . 2.0 mm x 850mm SS Cable/Sleeve; Part Number 01-0020-S 2.0 mm SS Sleeve Only; Part Number 01-0022-S 8, 7 hole, SS compression plate; Part Number 02-2007-S 10, 9 hole, SS compression plate; Part Number 02 — Class II
• Acu-Loc and Acu-Loc 2 bone plates, screws and accessories for the following REF: 70-0045 Acu-Loc VDU Plate Standard, Left; 70-0045-S Acu-Loc VDU Plate Standard, Left; 70-0046 Acu-Loc VDU Plate Standard, Right; 70-0046-S Acu-Loc VDU Plate Standard, Right; 70-0047 Acu-Loc VDU Plate Long, Left; 70-0047 — Class II

This page indexes a public government recall notice for reference. We do not sell or verify this product; always confirm the current status on the authority's official site.