🏛Compiled from an official source — the facts on this page are reproduced from the issuing authority’s own published notice, which is linked above. No AI-generated text appears on this page. How we use AI →
Reported risk: The cross-sectional area of the external and internal wires is too small and the wires could overheat. The wire ends soldered to the terminals of the rectifier unit and the LEDs are not adequately protected against pulling and twisting. The accessible basic insulated wires can come into contact with sharp edges of the flashing switch and the control unit. The insulation provided by the shrink tubing for the LEDs is inadequate. The product is not protected against moisture but is recommended for outdoor use.The product does not comply with the requirements of the Low Voltage Directive and the relevant European standard EN 60598.
Verify each fact at the issuing agency before acting. Recall scope, affected lots, and remediation instructions may be updated by the agency after our last sync.
ProductGuru indexes recall and safety-alert records from ~30 public agency registries. We are not lawyers, regulators or product-safety consultants. This page restates what the named agency published; consult the primary source above (or qualified counsel in your jurisdiction) before any commercial, medical or safety decision.