High-pressure scuba diving air hoses — recall 13090
U.S. CPSC · United States · 2013-01-10
🏛Compiled from an official source — the facts on this page are reproduced from the issuing authority’s own published notice, which is linked above. No AI-generated text appears on this page. How we use AI →
Reported risk: The recalled air hoses are high-pressure scuba air hoses with a black, smooth rubber outer covering. They are about half a centimeter in diameter and 32 or 36 inches long. These hoses connect the regulator to the tank pressure gauge. The phrase "Scuba Diving High Pressure hose I.D. 3/16" (4.76 mm) W.P. 5000 PSI Exceeds SAE 100RT braid with Kevlar fiber from Dupont" is printed in white lettering on the hose's outer covering. The hoses have metal fittings on each end. "CE EN 250 230" is stamped on the female side of the fitting and "12Q1" on the male side. Hazards: The diving hose that connects the regulator to the tank's pressure gauge can separate reducing the available air supply to the diver, posing a drowning hazard.
Verify each fact at the issuing agency before acting. Recall scope, affected lots, and remediation instructions may be updated by the agency after our last sync.
ProductGuru indexes recall and safety-alert records from ~30 public agency registries. We are not lawyers, regulators or product-safety consultants. This page restates what the named agency published; consult the primary source above (or qualified counsel in your jurisdiction) before any commercial, medical or safety decision.